
Coils, Sheets, Plates

Pipes/Tubes

Rods, Flats, Bars,
Squares, Hexes

Pipe fittings &
Ball Valves
Designer /
Architectural
Stainless Steel
|
Chemical
Composition
Stainless
Steels and coils of Austentic, Ferritic and Mortensitic grades confirming
to IS and AISI/ASTM or equivalent international specifications
are available in the following sizes and finishing for a variety
of application. |
Sizes*
Coils
Dimension
Thickness
|
Range(mm)
0.3 to 6.00
|
Standard Sizes(mm)
0.30, 0.40,
0.50, 0.55, 0.63, 0.70, 0.80, 0.90, 1.00, 1.25, 1.50, 1.60, 2.00,
2.50, 2.80, 3.00, 3.15, 3.60, 4.00, 5.00, 6.00
|
Width |
50
to 250 |
1000,1250 |
Inner
Diameter |
|
406
to 610 |
Sheets
Dimension
Thickness
|
Range(mm)
0.30 to 6.00
|
Standard Sizes(mm)
0.30, 0.40,
0.50, 0.55, 0.63, 0.70, 0.80, 0.90, 1.00, 1.25, 1.50, 1.60, 2.00,
2.50, 2.80, 3.00, 3.15, 3.60, 4.00, 5.00, 6.00
|
Width |
600
to 1250 |
1000,1250 |
Length |
500
to 4000 |
1500,
2000, 2500, 3000, 3500, 4000 |
Finishes**
Finishes |
Description |
CR |
Work
Hardened |
2D |
Cold
rolled annealed and pickled. Best suited for deep drawing operations
owing to better retention of lubricants |
2B |
Cold
rolled annealed and pickled and skinpassed |
3 |
A
polished finish obtained with abrasives of 100 to 120 grit size. |
4 |
A
polished finish produced with abrasives in grit size 120 to 150. |
6 |
Dull
stain finish : tampico brushed. Used for architectural applications
where high lustre is undesirable. |
7 |
Has
a high degree of reflectivity. Used for architectural finely ground
surface but the grit lines are not removed fully. |
8 |
Mirror
finish used for applications requiring very high degree of reflectivity
like press plates, small and reflectors. |
Hairline |
A
special polished finish exhibiting continuous lines produced by abrasices.
|
*
Non - standard sizes can be supplied.
** Coils can be delivered in 2D,2B, N0.3 and No.4 finishes. Sheets
can be delivered in all the finishes indicated above. Grades and thickness
for finishes other than 2D and 2B to be confirmed before order placement.
|





|